X-Six SQ LED - CCT
Multifunctional and versatile luminaire with CCT selector switch
Multi-purpose luminaire prepared for both recessed and surface mounting with quick bayonet bracket.
On-board CCT control
All models are fitted with a CCT selector switch on the back of the housing that allows 3 different light colour temperatures to be set. (3000K 4000K 6000K)
All accessories are included in the packaging
All models are fitted with a CCT selector switch on the back of the housing that allows 3 different light colour temperatures to be set. (3000K 4000K 6000K)
All accessories are included in the packaging
MULTIPOWER SYSTEM
The Multipower system is able to select the power according to the actual lighting requirement, to avoid over-illumination in an energy-saving perspective. There is a special switch on the back for adjusting the power, in addition to the one available on all versions for adjusting the colour temperature (CCT).
The Multipower system is able to select the power according to the actual lighting requirement, to avoid over-illumination in an energy-saving perspective. There is a special switch on the back for adjusting the power, in addition to the one available on all versions for adjusting the colour temperature (CCT).
ADJUSTABLE SYSTEM
Installation system that allows existing holes to be used or the installer's drilling tools to be optimised. Removable rear bracket with preset positions to suit different diameters: 18W holes between 65 and 210mm 24W holes between 65 and 310mm
Installation system that allows existing holes to be used or the installer's drilling tools to be optimised. Removable rear bracket with preset positions to suit different diameters: 18W holes between 65 and 210mm 24W holes between 65 and 310mm
On-board CCT adjustment
Colour temperature defines the light appearance of a white LED. CCT is expressed in degrees Kelvin; a warm light is around 3000K, a neutral white around 4000K and a cool white from 5000 to 6500K. Selecting the appropriate colour temperature for each application is a fundamental aspect of luminaire design, but it is not always possible to carry out a proper analysis of the most suitable colour temperature in advance, taking into account the use and installation environment. Therefore, it becomes extremely versatile to be able to change the CCT of the same luminaire in the field by operating a simple selector switch.
Installation
Fixing springs for installation on suspended ceiling
Quick bracket with spacer for ceiling installation Switch to select desired color temperature